Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 410M Single Row Ball Bearings	60.000 mm	110.0000 mm	36.50 mm	1.50 mm
SKF 409M Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF 408M Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm
SKF 407SF Single Row Ball Bearings	10.000 mm	35.0000 mm	19.1 mm	0.64 mm
SKF 408MFF Single Row Ball Bearings	90.000 mm	190.0000 mm	43.0 mm	73.03 mm
SKF 407MF Single Row Ball Bearings	220.000 mm	340.0000 mm	56.00 mm	2.50 mm
SKF 406SF Single Row Ball Bearings	75.000 mm	130.0000 mm	41.30 mm	1.50 mm
SKF R6ZZST Single Row Ball Bearings	110.000 mm	200.0000 mm	38.00 mm	2.00 mm
SKF R8ST Single Row Ball Bearings	100.000 mm	180.0000 mm	34.00 mm	2.00 mm
SKF R6Z Single Row Ball Bearings	70.000 mm	150.0000 mm	63.50 mm	2.00 mm
SKF R4A Single Row Ball Bearings	1 3/8 in	1.4063 in	0.5625 in	3.5000 in
SKF R8F Single Row Ball Bearings	280.000 mm	420.0000 mm	65.00 mm	3.00 mm