Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 413S Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 413MFF Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF 411MFF Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm
SKF 410S Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF 409S Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm
SKF 411M Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF 410MFF Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 411MF Single Row Ball Bearings	220.000 mm	340.0000 mm	56.00 mm	2.50 mm
SKF 409MF Single Row Ball Bearings	60.000 mm	150.0000 mm	70.00 mm	2.00 mm
SKF 412S Single Row Ball Bearings	220.000 mm	340.0000 mm	56.00 mm	2.50 mm
SKF 410MF Single Row Ball Bearings	280.000 mm	420.0000 mm	65.00 mm	3.00 mm
SKF 411S Single Row Ball Bearings	65.000 mm	120.0000 mm	46.00 mm	1.50 mm