Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number Bore Dia Outer DIa Width Size
SKF R8Z Single Row Ball Bearings 60.000 mm 110.0000 mm 38.10 mm 1.50 mm
SKF 8013 Single Row Ball Bearings 160.000 mm 240.0000 mm 38.00 mm 2.00 mm
70 mm x 150 mm x 35 mm TIMKEN 314KD Single Row Ball Bearings 1 in 1.1563 in 0.5313 in 2.5000 in
60 mm x 110 mm x 22 mm TIMKEN 212NP Single Row Ball Bearings 40.000 mm 90.0000 mm 36.50 mm 1.50 mm
TIMKEN 625-2RS Single Row Ball Bearings 100.000 mm 215.0000 mm 82.60 mm 2.50 mm
TIMKEN 6030-ZZ Single Row Ball Bearings 60.000 mm 130.0000 mm 54.00 mm 2.00 mm
TIMKEN 6030-2RS Single Row Ball Bearings 110.000 mm 240.0000 mm 92.10 mm 2.50 mm
TIMKEN 6021-Z Single Row Ball Bearings 150.000 mm 225.0000 mm 35.00 mm 2.00 mm
SKF 87501 Single Row Ball Bearings 240.000 mm 360.0000 mm 56.00 mm 2.50 mm
SKF 87500 Single Row Ball Bearings 240.000 mm 360.0000 mm 56.00 mm 2.50 mm
SKF 87503 Single Row Ball Bearings 240.000 mm 360.0000 mm 56.00 mm 2.50 mm
SKF 87038 Single Row Ball Bearings 105.000 mm 160.0000 mm 26.00 mm 2.00 mm
1/32