Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF R6FFST Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF R4FFST Single Row Ball Bearings	85.000 mm	130.0000 mm	22.00 mm	1.00 mm
SKF R4F Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm
SKF R4AF Single Row Ball Bearings	280.000 mm	500.0000 mm	80.00 mm	4.00 mm
SKF R6F Single Row Ball Bearings	45.000 mm	100.0000 mm	25.00 mm	1.50 mm
SKF R6FF Single Row Ball Bearings	110.000 mm	240.0000 mm	50.00 mm	2.50 mm
SKF R3ZZST Single Row Ball Bearings	280.000 mm	350.0000 mm	33.00 mm	2.00 mm
SKF R3FFST Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF R6 Single Row Ball Bearings	37FSF1	7.000 mm	22.0000 mm	8.0 mm
SKF R4FF Single Row Ball Bearings	220.000 mm	340.0000 mm	56.00 mm	2.50 mm
SKF R4AZZ Single Row Ball Bearings	220.000 mm	340.0000 mm	56.00 mm	2.50 mm
SKF R3F Single Row Ball Bearings	3/4 in	1.2500 in	0.7500 in	2.5000 in