Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF R10ZZST Single Row Ball Bearings	150.000 mm	225.0000 mm	70.00 mm	2.00 mm
SKF 415S Single Row Ball Bearings	220.000 mm	340.0000 mm	56.00 mm	2.50 mm
SKF 417MFF Single Row Ball Bearings	70.000 mm	150.0000 mm	63.50 mm	2.00 mm
SKF 488502 Single Row Ball Bearings	140.000 mm	210.0000 mm	33.00 mm	2.00 mm
SKF 418MF Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm
SKF 418M Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm
SKF 415MFF Single Row Ball Bearings	180.000 mm	250.0000 mm	33.00 mm	2.00 mm
SKF 417M Single Row Ball Bearings	30.000 mm	55.0000 mm	26.00 mm	1.00 mm
SKF 415M Single Row Ball Bearings	45.000 mm	100.0000 mm	42.90 mm	1.50 mm
SKF 414MFF Single Row Ball Bearings	110.000 mm	240.0000 mm	50.00 mm	2.50 mm
SKF 414MF Single Row Ball Bearings	75.000 mm	160.0000 mm	71.40 mm	2.00 mm
SKF 414M Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm