Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 406S Single Row Ball Bearings	280.000 mm	420.0000 mm	65.00 mm	3.00 mm
SKF 405S Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF R10 Single Row Ball Bearings	165-87	88.903 mm	160.3000 mm	76.20 mm
SKF R16F Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm
SKF R16 Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF MRC R14FF Single Row Ball Bearings	50.000 mm	110.0000 mm	47.60 mm	2.00 mm
SKF R12F Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm
SKF R12FFST Single Row Ball Bearings	207FFS	35.000 mm	72.0000 mm	17.0 mm
SKF 488504 Single Row Ball Bearings	85.000 mm	150.0000 mm	49.20 mm	2.00 mm
SKF 488503 Single Row Ball Bearings	220.000 mm	340.0000 mm	56.00 mm	2.50 mm
SKF 487503 Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm
SKF R12 Single Row Ball Bearings	40.000 mm	90.0000 mm	36.50 mm	1.50 mm