Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 1801S Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
SKF 1800SFF Single Row Ball Bearings	150.000 mm	225.0000 mm	35.00 mm	2.00 mm
SKF 1800SZZ Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 1800S Single Row Ball Bearings	190.000 mm	290.0000 mm	46.00 mm	2.00 mm
SKF 305MFF7 Single Row Ball Bearings	90.000 mm	190.0000 mm	73.00 mm	2.50 mm
SKF 100KSF Single Row Ball Bearings	35.000 mm	80.0000 mm	34.90 mm	1.50 mm
SKF 100KS Single Row Ball Bearings	35.000 mm	72.0000 mm	27.00 mm	1.00 mm
SKF 100KSZZ Single Row Ball Bearings	110.000 mm	240.0000 mm	50.00 mm	2.50 mm
SKF 100KSFF Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
LINK BELT 35RB3211E3 Single Row Ball Bearings	190.000 mm	290.0000 mm	46.00 mm	2.00 mm
LINK BELT 35R3211E3 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
LINK BELT 24R6208E3 Single Row Ball Bearings	65.000 mm	120.0000 mm	38.10 mm	1.50 mm