Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 1808SZZ Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 1812SZZ Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm
SKF 1812S Single Row Ball Bearings	1 3/8 in	1.4063 in	0.5625 in	4.1875 in
SKF 1805S Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm
SKF 1809SZZ Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
SKF 1805SZZ Single Row Ball Bearings	100.000 mm	150.0000 mm	24.00 mm	1.50 mm
SKF 1807SZZ Single Row Ball Bearings	3/4 in	1.5000 in	2.5625 in	2.0000 in
SKF 1806SZZ Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
SKF 1801SZZ Single Row Ball Bearings	70.000 mm	150.0000 mm	63.50 mm	2.00 mm
SKF 1804SZZ Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 1803SFF Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 1802SFF Single Row Ball Bearings	75.000 mm	160.0000 mm	68.30 mm	2.00 mm