Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 112KS Single Row Ball Bearings	280.000 mm	420.0000 mm	65.00 mm	3.00 mm
SKF 111KSG Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 111KSZZ Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 111KSFF Single Row Ball Bearings	70.000 mm	125.0000 mm	39.70 mm	1.50 mm
SKF 111KS Single Row Ball Bearings	55.000 mm	100.0000 mm	42.00 mm	1.50 mm
SKF 110KSZZG Single Row Ball Bearings	280.000 mm	420.0000 mm	65.00 mm	3.00 mm
SKF 110KSZZ Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 110KSFF Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 110KSF Single Row Ball Bearings	160.000 mm	240.0000 mm	38.00 mm	2.00 mm
SKF 110KS Single Row Ball Bearings	202FFS2G	16.000 mm	35.0000 mm	11.0 mm
SKF 109KSFF Single Row Ball Bearings	208FFS	40.000 mm	80.0000 mm	21.0 mm
SKF 109KSZZ Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm