Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 107KSZ Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
SKF 107KSZZG Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 107KSFF Single Row Ball Bearings	160.000 mm	240.0000 mm	38.00 mm	2.00 mm
SKF 107KSF Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 107KS Single Row Ball Bearings	75.000 mm	160.0000 mm	71.40 mm	2.00 mm
SKF 106KSF Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 105KSFF Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 106KS Single Row Ball Bearings	-	11.000 mm	32.0000 mm	10.0 mm
SKF 105KSF Single Row Ball Bearings	100.000 mm	215.0000 mm	82.60 mm	2.50 mm
SKF 105KSZ Single Row Ball Bearings	60.000 mm	110.0000 mm	38.10 mm	1.50 mm
SKF 105KS Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF 112KSZZ Single Row Ball Bearings	80.000 mm	170.0000 mm	68.30 mm	2.00 mm