Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 128MF Single Row Ball Bearings	140.000 mm	210.0000 mm	33.00 mm	2.00 mm
SKF 126M Single Row Ball Bearings	90-77	41.280 mm	87.3100 mm	41.28 mm
SKF 126KS Single Row Ball Bearings	75.000 mm	160.0000 mm	37.00 mm	2.00 mm
SKF 124MF Single Row Ball Bearings	15/16 in	1.1875 in	0.5938 in	2.5000 in
SKF 122KS Single Row Ball Bearings	60.000 mm	130.0000 mm	54.00 mm	2.00 mm
SKF 124KSFF Single Row Ball Bearings	1 1/4 in	1.4063 in	0.5625 in	3.5000 in
SKF 124KSF Single Row Ball Bearings	120.000 mm	215.0000 mm	40.00 mm	2.00 mm
SKF 124KSFFG Single Row Ball Bearings	165-27	88.903 mm	160.3000 mm	76.20 mm
SKF 124KSF-T44 Single Row Ball Bearings	65.000 mm	140.0000 mm	33.00 mm	2.00 mm
SKF 122KSF Single Row Ball Bearings	40.000 mm	90.0000 mm	23 mm	58.00 mm
SKF 122KSFF Single Row Ball Bearings	1 1/2 in	1.5313 in	0.6563 in	4.5625 in
SKF 120MF Single Row Ball Bearings	3/4 in	1.3750 in	3.6875 in	2.3750 in