Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 200SFF22 Single Row Ball Bearings	170.000 mm	360.0000 mm	144.00 mm	3.00 mm
SKF 200SF Single Row Ball Bearings	12.000 mm	24.0000 mm	6.00 mm	0.30 mm
SKF 200S Single Row Ball Bearings	30.000 mm	72.0000 mm	30.20 mm	1.00 mm
SKF 1924S-BRZ Single Row Ball Bearings	150.000 mm	225.0000 mm	35.00 mm	2.00 mm
SKF 1913S Single Row Ball Bearings	208FSF	40.000 mm	80.0000 mm	21.0 mm
SKF 1916S Single Row Ball Bearings	36FSF	6.000 mm	19.0000 mm	8.0 mm
SKF 1911S Single Row Ball Bearings	1 7/16 in	1.7500 in	1.1250 in	3.6563 in
SKF 1910SZZ Single Row Ball Bearings	-	26.000 mm	52.0000 mm	15.0 mm
SKF 1910S Single Row Ball Bearings	20 mm	25.8 mm	11.1 mm	111.9 mm
SKF 1909S Single Row Ball Bearings	140.000 mm	190.0000 mm	48.00 mm	1.50 mm
SKF 1908SZZ Single Row Ball Bearings	38FSF1	8.000 mm	22.0000 mm	8.0 mm
SKF 1906S Single Row Ball Bearings	320.000 mm	400.0000 mm	38.00 mm	2.00 mm