Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 206SST Single Row Ball Bearings	20 mm	24.6 mm	11.1 mm	111.9 mm
SKF 206SFG Single Row Ball Bearings	95.000 mm	200.0000 mm	77.80 mm	2.50 mm
SKF 206SFFC Single Row Ball Bearings	207FSF	35.000 mm	72.0000 mm	17.0 mm
SKF 206SG Single Row Ball Bearings	150.000 mm	210.0000 mm	28.00 mm	2.00 mm
SKF 206SFFG Single Row Ball Bearings	1 1/4 in	1.5000 in	3.2500 in	3.0000 in
SKF 206SF Single Row Ball Bearings	150.000 mm	225.0000 mm	35.00 mm	2.00 mm
SKF 206SFFST Single Row Ball Bearings	40.000 mm	90.0000 mm	36.50 mm	1.50 mm
SKF 206S Single Row Ball Bearings	150.000 mm	225.0000 mm	35.00 mm	2.00 mm
SKF 202SF Single Row Ball Bearings	202FSF	15.000 mm	35.0000 mm	11.0 mm
SKF 206MFG Single Row Ball Bearings	1 7/16 in	1.4063 in	0.5625 in	3.5000 in
SKF 206MG Single Row Ball Bearings	1 1/4 in	1.6250 in	4.3750 in	2.7500 in
SKF 202S Single Row Ball Bearings	50.000 mm	110.0000 mm	47.60 mm	2.00 mm