Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 205SFFST Single Row Ball Bearings	12.000 mm	28.0000 mm	8.00 mm	0.30 mm
SKF 205S Single Row Ball Bearings	38FFS2	8.000 mm	24.0000 mm	8.0 mm
SKF 205SFF Single Row Ball Bearings	201FFS2	12.000 mm	32.0000 mm	10.0 mm
SKF 204SZZST Single Row Ball Bearings	240.000 mm	440.0000 mm	72.00 mm	3.00 mm
SKF 205SFFCG Single Row Ball Bearings	3/4 in	1.0156 in	0.4375 in	2.6875 in
SKF 205SG Single Row Ball Bearings	50.000 mm	110.0000 mm	44.40 mm	2.00 mm
SKF 205SFFC Single Row Ball Bearings	205FFS	25.000 mm	52.0000 mm	15.0 mm
SKF 205SF Single Row Ball Bearings	35.000 mm	80.0000 mm	34.90 mm	1.50 mm
SKF 204SST Single Row Ball Bearings	130.000 mm	200.0000 mm	33.00 mm	2.00 mm
SKF 204SZ Single Row Ball Bearings	200.000 mm	280.0000 mm	38.00 mm	2.00 mm
SKF 204SG Single Row Ball Bearings	75.000 mm	105.0000 mm	16.00 mm	1.00 mm
SKF 204SFFG Single Row Ball Bearings	204FS	20.000 mm	47.0000 mm	14.0 mm