Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 210SFFG Single Row Ball Bearings	30.000 mm	72.0000 mm	30.20 mm	1.00 mm
SKF 210SZ Single Row Ball Bearings	65.000 mm	140.0000 mm	58.70 mm	2.00 mm
SKF 210SZZG Single Row Ball Bearings	3/4 in	1.1250 in	2.5000 in	2.0000 in
SKF 210SFFC Single Row Ball Bearings	140.000 mm	210.0000 mm	33.00 mm	2.00 mm
SKF 211MF Single Row Ball Bearings	50.000 mm	110.0000 mm	47.60 mm	2.00 mm
SKF 210SG Single Row Ball Bearings	206FFSG	30.000 mm	62.0000 mm	16.0 mm
SKF 103KSZZST Single Row Ball Bearings	G203FSF	17.000 mm	40.0000 mm	12.0 mm
SKF 204SZZST-W64F Single Row Ball Bearings	G202FSF	15.000 mm	35.0000 mm	11.0 mm
SKF 1906SFFP Single Row Ball Bearings	35.000 mm	80.0000 mm	34.90 mm	1.50 mm
SKF R16ZZST Single Row Ball Bearings	140.000 mm	210.0000 mm	33.00 mm	2.00 mm
SKF 304SZZST Single Row Ball Bearings	65.000 mm	140.0000 mm	48.00 mm	2.00 mm
SKF 1910SFFP Single Row Ball Bearings	70.000 mm	150.0000 mm	63.50 mm	2.00 mm