Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 105KSZZST Single Row Ball Bearings	1 in	1.2500 in	2.7500 in	2.0000 in
SKF 314S-HYB 1 Single Row Ball Bearings	160.000 mm	240.0000 mm	38.00 mm	2.00 mm
SKF 315S-HYB 1 Single Row Ball Bearings	120.000 mm	180.0000 mm	28.00 mm	2.00 mm
SKF 313S-HYB 1 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 311S-HYB 1 Single Row Ball Bearings	130.000 mm	280.0000 mm	58.00 mm	3.00 mm
SKF 312S-HYB 1 Single Row Ball Bearings	30.000 mm	72.0000 mm	30.20 mm	1.00 mm
SKF 220S-HYB 1 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 222S-HYB 1 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 310S-HYB 1 Single Row Ball Bearings	120.000 mm	180.0000 mm	28.00 mm	2.00 mm
SKF 308S-HYB 1 Single Row Ball Bearings	1 3/16 in	1.5000 in	3.2500 in	3.0000 in
SKF 307S-HYB 1 Single Row Ball Bearings	75.000 mm	130.0000 mm	41.30 mm	1.50 mm
SKF 309S-HYB 1 Single Row Ball Bearings	160.000 mm	240.0000 mm	38.00 mm	2.00 mm