Self Aligning Ball Bearings

Contact Now

Self-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the inner ring, balls and cage to deflect to some extent around the bearings center. The axial load capacity is low since the contact angle is small. Under normal loads, the permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees).

Product Features and Benefits:High quality steel - Ultra clean steel helps extend bearing life extended up to 80%,Pressed steel and polyamide cages available,Advanced Grease Technology - Lubricants that can extend grease life and performance.High grade balls - Smooth and quiet operation even at high speeds.Super Finished Raceways - Refined to minimize noise and improve lubricant life and distribution.Sealed versions are available

RHP BEARING 2205TN Self Aligning Ball Bearings

FAG BEARING Bearings
0.0 B04336

RHP BEARING 1306TNC3 Self Aligning Ball Bearings

MOLINE BEARING N/A
Mounted Units & 0

RHP BEARING 1210TNC3 Self Aligning Ball Bearings

B00234 Bearings
0.0 N/A

RHP BEARING 1209KTNC3 Self Aligning Ball Bearings

0132143 LINK BELT
B22439HL 31171533

RHP BEARING 1208KTNC3 Self Aligning Ball Bearings

Uncoated ABEC 1
Triple Lip Seal Spherical

RHP BEARING 1206KTN Self Aligning Ball Bearings

ASAHI BEARINGS AMI BEARINGS
2.533 M06110

RHP BEARING 1205TN Self Aligning Ball Bearings

60 mm Phenolic Resin
C0 Not for Ball Screws

RHP BEARING 1205KTN Self Aligning Ball Bearings

B04144 0.275
0.0 N/A

RHP BEARING 1307TNH Self Aligning Ball Bearings

TIMKEN 0
QM INDUSTRIES 0883450963824

CONSOLIDATED BEARING 2228 M Self Aligning Ball Bearings

1 mm 6.55 kN
0.24 lb 13.5 kN

CONSOLIDATED BEARING RM-16 Self Aligning Ball Bearings

Bearings M06288
0 N/A

RHP BEARING 2205M Self Aligning Ball Bearings

FAG BEARING B04336
Bearings 85
2/31