Mounted Units & Inserts

Contact Now

Collar bearings support high axial loads and limit radial movement. Flanges help ensure that the bearing is flush and provides added rigidity. Pillow-block (Plummer block) bearings attach to a vertical or horizontal surface to support rotating shafts and with light to moderate loads, such as in conveying and other operations where the shaft passes through the bearing. Take up bearings are used to align track and tension conveyor belts.

Mounted bearings, sometimes called bearing units or bearing blocks, have a bearing installed in a housing to ease installation and provide additional support for the bearing. They are face or surface mounted in applications where the shaft is perpendicular to the unit. Bearing inserts are used to replace worn or damaged bearings in an existing bearing housing.

AMI UETPL206-18W Mounted Units & Inserts

279.999 mm 4.763 mm
104.775 mm 2400 r/min

AMI UCWTPL204-12CW Mounted Units & Inserts

120 mm 2
212 kN 340 mm

AMI UETPL205W Mounted Units & Inserts

70.5 mm 25 mm
64.7 mm 67.6 mm

AMI UCWTPL208CEW Mounted Units & Inserts

18 mm 1.1 mm
65 mm 53 N/µm

AMI UETPL205-16W Mounted Units & Inserts

Seal & Snap-Ring 36000 rpm
0.30 mm 10.000 mm

AMI UCWTPL208-24CEW Mounted Units & Inserts

4300 rpm Shield & Seal & Snap
55.000 mm 33.30 mm

AMI UETPL205-15W Mounted Units & Inserts

1/4-28 UNF Cast iron
0.5 in 25.5 kN

AMI UCWTPL207CEW Mounted Units & Inserts

98.425 mm 101.6 mm
64.795 mm 12.5 kN

AMI UCWTPL207-23CEW Mounted Units & Inserts

43000 rpm 950 N
6.00 mm 2210 N

AMI UETPL205-14W Mounted Units & Inserts

0.5 in 5/16-24 UNF
16.1 mm 6.5 N·m

AMI UCWTPL206-20CEW Mounted Units & Inserts

43600 N 29000 N
21.00 mm 1.50 mm

AMI UCWTPL207-22CEW Mounted Units & Inserts

Two Shields & Snap-R 7800 rpm
29200 N 9500 rpm
2/31