Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 211SZZC Single Row Ball Bearings	201FSF3	13.000 mm	32.0000 mm	10.0 mm
SKF 211SZZG Single Row Ball Bearings	206FSF	30.000 mm	62.0000 mm	16.0 mm
SKF 211SZZ Single Row Ball Bearings	170.000 mm	230.0000 mm	28.00 mm	2.00 mm
SKF 211SG Single Row Ball Bearings	-	7.000 mm	24.0000 mm	8.0 mm
SKF 211SZ Single Row Ball Bearings	90.000 mm	225.0000 mm	54.00 mm	3.00 mm
SKF 211SFF Single Row Ball Bearings	70.000 mm	150.0000 mm	63.50 mm	2.00 mm
SKF 211S Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 211SF Single Row Ball Bearings	65.000 mm	140.0000 mm	61.90 mm	2.00 mm
SKF 211MG Single Row Ball Bearings	35.000 mm	80.0000 mm	38.10 mm	1.50 mm
SKF 211MFG Single Row Ball Bearings	30.000 mm	72.0000 mm	30.20 mm	1.00 mm
SKF 211MFFG Single Row Ball Bearings	1 1/2 in	1.6250 in	3.9375 in	3.5000 in
SKF 210SZZC Single Row Ball Bearings	190.000 mm	260.0000 mm	33.00 mm	2.00 mm