Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 228S-HYB 1 Single Row Ball Bearings	160.000 mm	240.0000 mm	38.00 mm	2.00 mm
SKF 230S-HYB 1 Single Row Ball Bearings	55.000 mm	100.0000 mm	21.00 mm	1.50 mm
SKF 236S-HYB 1 Single Row Ball Bearings	110.000 mm	240.0000 mm	50.00 mm	2.50 mm
SKF 224S-HYB 1 Single Row Ball Bearings	100.000 mm	215.0000 mm	73.00 mm	2.50 mm
SKF 306S-HYB 1 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 232S-HYB 1 Single Row Ball Bearings	203FFSG	17.000 mm	40.0000 mm	12.0 mm
SKF 226S-HYB 1 Single Row Ball Bearings	40.000 mm	90.0000 mm	23.00 mm	1.50 mm
SKF 218S-HYB 1 Single Row Ball Bearings	150.000 mm	225.0000 mm	35.00 mm	2.00 mm
SKF 205SZZST-W64F Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
SKF 101KSZZST Single Row Ball Bearings	120.000 mm	215.0000 mm	40.00 mm	2.00 mm
SKF 212MFF Single Row Ball Bearings	170.000 mm	360.0000 mm	72.00 mm	3.00 mm
SKF 212MF Single Row Ball Bearings	130.000 mm	200.0000 mm	33.00 mm	2.00 mm