Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number Bore Dia Outer DIa Width Size
SKF R3 Single Row Ball Bearings 60.000 mm 110.0000 mm 36.50 mm 1.50 mm
SKF R20F Single Row Ball Bearings 1 in 1.5000 in 2.8125 in 2.0000 in
SKF R2FFST Single Row Ball Bearings 200.000 mm 310.0000 mm 51.00 mm 2.00 mm
SKF R2A Single Row Ball Bearings 220.000 mm 340.0000 mm 56.00 mm 2.50 mm
SKF R2AFF Single Row Ball Bearings 207FFSG 35.000 mm 72.0000 mm 17.0 mm
SKF R24F Single Row Ball Bearings 280.000 mm 420.0000 mm 65.00 mm 3.00 mm
SKF R2 Single Row Ball Bearings 280.000 mm 420.0000 mm 65.00 mm 3.00 mm
SKF R20Z Single Row Ball Bearings 60.000 mm 110.0000 mm 38.10 mm 1.50 mm
SKF R18 Single Row Ball Bearings 320.000 mm 480.0000 mm 74.00 mm 3.00 mm
SKF R20FF Single Row Ball Bearings 3/4 in 1.4375 in 2.6250 in 2.0000 in
SKF 115KSFFG Single Row Ball Bearings 45.000 mm 100.0000 mm 39.70 mm 1.50 mm
SKF 115KSF Single Row Ball Bearings 220.000 mm 340.0000 mm 56.00 mm 2.50 mm
8/32