Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 1908S Single Row Ball Bearings	1 7/16 in	1.6250 in	4.8125 in	3.0000 in
SKF 1905SZZ Single Row Ball Bearings	60.000 mm	130.0000 mm	54.00 mm	2.00 mm
SKF 1907S Single Row Ball Bearings	60.000 mm	130.0000 mm	54.00 mm	2.00 mm
SKF 1903S Single Row Ball Bearings	50.000 mm	90.0000 mm	20.00 mm	1.00 mm
SKF 1902S Single Row Ball Bearings	50.000 mm	110.0000 mm	47.60 mm	2.00 mm
SKF 1905S Single Row Ball Bearings	80.000 mm	125.0000 mm	22.00 mm	1.00 mm
SKF 132M Single Row Ball Bearings	45.000 mm	100.0000 mm	25.00 mm	1.50 mm
SKF 1900S Single Row Ball Bearings	1 1/2 in	1.5313 in	0.6563 in	4.5625 in
SKF 1904S Single Row Ball Bearings	150.000 mm	225.0000 mm	35.00 mm	2.00 mm
SKF 1904SZZ Single Row Ball Bearings	-	14.000 mm	35.0000 mm	11.0 mm
SKF 1903SFF Single Row Ball Bearings	205FSF	25.000 mm	52.0000 mm	15.0 mm
SKF 1901S Single Row Ball Bearings	130.000 mm	200.0000 mm	33.00 mm	2.00 mm