Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 1912S Single Row Ball Bearings	45.000 mm	100.0000 mm	39.70 mm	1.50 mm
SKF 201SZ Single Row Ball Bearings	75.000 mm	160.0000 mm	68.30 mm	2.00 mm
SKF 201SFF Single Row Ball Bearings	30.000 mm	72.0000 mm	30.20 mm	1.00 mm
SKF 201SF Single Row Ball Bearings	20.000 mm	32.0000 mm	7.00 mm	0.30 mm
SKF 201S Single Row Ball Bearings	200FFS	10.000 mm	30.0000 mm	9.0 mm
SKF 200SZZC Single Row Ball Bearings	25.000 mm	62.0000 mm	17.00 mm	1.00 mm
SKF 200SZZST Single Row Ball Bearings	85.000 mm	150.0000 mm	49.20 mm	2.00 mm
SKF 200SZZG Single Row Ball Bearings	135-107	31.750 mm	68.2600 mm	31.75 mm
SKF 1917S Single Row Ball Bearings	30.000 mm	55.0000 mm	13.00 mm	1.00 mm
SKF 200SFFG Single Row Ball Bearings	130.000 mm	200.0000 mm	33.00 mm	2.00 mm
SKF 201ES Single Row Ball Bearings	201FFS2	13.000 mm	32.0000 mm	10.0 mm
SKF 200SFF Single Row Ball Bearings	200FSF	10.000 mm	30.0000 mm	9.0 mm