Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 204SFFC Single Row Ball Bearings	55.000 mm	120.0000 mm	29.00 mm	2.00 mm
SKF 204SFF Single Row Ball Bearings	155-07	69.850 mm	120.7000 mm	57.15 mm
SKF 204SF Single Row Ball Bearings	45.000 mm	85.0000 mm	30.20 mm	1.00 mm
SKF 204SFF7 Single Row Ball Bearings	60.000 mm	130.0000 mm	57.20 mm	2.00 mm
SKF 204S Single Row Ball Bearings	17.000 mm	40.0000 mm	17.46 mm	0.64 mm
SKF 207SF Single Row Ball Bearings	1 1/4 in	1.6250 in	4.8125 in	3.0000 in
SKF 203SZZST Single Row Ball Bearings	240.000 mm	360.0000 mm	56.00 mm	2.50 mm
SKF 203SFFST Single Row Ball Bearings	80.000 mm	170.0000 mm	68.30 mm	2.00 mm
SKF 203SG Single Row Ball Bearings	205FFSG	25.000 mm	52.0000 mm	15.0 mm
SKF 203SZZG Single Row Ball Bearings	204FSF	20.000 mm	47.0000 mm	14.0 mm
SKF 203SFFG Single Row Ball Bearings	206FFS	30.000 mm	62.0000 mm	16.0 mm
SKF 207SFFC Single Row Ball Bearings	35.000 mm	80.0000 mm	34.90 mm	1.50 mm