Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 109KSG Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 108KSZZG Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 109KS Single Row Ball Bearings	45.000 mm	100.0000 mm	39.70 mm	1.50 mm
SKF 108KSG Single Row Ball Bearings	110.000 mm	170.0000 mm	28.00 mm	2.00 mm
SKF 108KSZZ Single Row Ball Bearings	12.000 mm	28.0000 mm	8.00 mm	0.30 mm
SKF 108KSF Single Row Ball Bearings	85.000 mm	180.0000 mm	73.03 mm	2.50 mm
SKF 108KS Single Row Ball Bearings	40.000 mm	90.0000 mm	36.50 mm	1.50 mm
SKF 108KSFF Single Row Ball Bearings	G208FSF	40.000 mm	80.0000 mm	21.0 mm
SKF 488508 Single Row Ball Bearings	190.000 mm	290.0000 mm	46.00 mm	2.00 mm
SKF 488507 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 488506 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
SKF 488505 Single Row Ball Bearings	190.000 mm	290.0000 mm	46.00 mm	2.00 mm