Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 406M Single Row Ball Bearings	45.000 mm	100.0000 mm	39.70 mm	1.50 mm
SKF 405SFF1 Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 39FF Single Row Ball Bearings	70.000 mm	150.0000 mm	66.70 mm	2.00 mm
SKF 405SF Single Row Ball Bearings	280.000 mm	420.0000 mm	65.00 mm	3.00 mm
SKF 403S Single Row Ball Bearings	60.000 mm	130.0000 mm	54.00 mm	2.00 mm
SKF 39ZZ Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
SKF 405M Single Row Ball Bearings	1 1/8 in	1.6250 in	4.3750 in	2.7500 in
SKF 404SF Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF 39 Single Row Ball Bearings	320.000 mm	480.0000 mm	74.00 mm	3.00 mm
SKF 38Z Single Row Ball Bearings	300.000 mm	460.0000 mm	74.00 mm	3.00 mm
SKF 38ZZ Single Row Ball Bearings	70.000 mm	150.0000 mm	66.70 mm	2.00 mm
SKF 38F Single Row Ball Bearings	202FFS5	16.000 mm	35.0000 mm	11.0 mm