Self Aligning Ball Bearings

Contact Now

Self-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the inner ring, balls and cage to deflect to some extent around the bearings center. The axial load capacity is low since the contact angle is small. Under normal loads, the permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees).

Product Features and Benefits:High quality steel - Ultra clean steel helps extend bearing life extended up to 80%，Pressed steel and polyamide cages available，Advanced Grease Technology - Lubricants that can extend grease life and performance.High grade balls - Smooth and quiet operation even at high speeds.Super Finished Raceways - Refined to minimize noise and improve lubricant life and distribution.Sealed versions are available

Bearing Number	Bore Dia	Outer DIa	Width	Size
FAG 2304-TVH-C3 Self Aligning Ball Bearings	62201LLU	12x32x14	12,000	32,000
FAG 2301 Self Aligning Ball Bearings	6800Z	10x19x5	10,000	19,000
NTN 1210C3 Self Aligning Ball Bearings	6804	20x32x7	20	32
NTN 1210L1 Self Aligning Ball Bearings	K40X47X18	40	47	40 mm
NTN 1204J Self Aligning Ball Bearings	NJ315-E-MPA+HJ315-E	75x160x37	75	160
NTN 1203JC3 Self Aligning Ball Bearings	NJ328-E-MPA	140x300x62	140	300
NTN 1203J Self Aligning Ball Bearings	32328	140x300x107.75	140	300
NTN 1203C3 Self Aligning Ball Bearings	6410	50x130x31	50	130
NTN 1202G15C3 Self Aligning Ball Bearings	6706ZZ	30x37x4	30	37
NTN 1201C3 Self Aligning Ball Bearings	6407-NR	35x100x25	35	100
NTN 1201JC3 Self Aligning Ball Bearings	6800-2RS	10x19x5	10	19
NTN 1201G15C3 Self Aligning Ball Bearings	6801-2NKE	12x21x5	12	21