Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 8008 Single Row Ball Bearings	160.000 mm	240.0000 mm	38.00 mm	2.00 mm
SKF 8026 Single Row Ball Bearings	70.000 mm	150.0000 mm	63.50 mm	2.00 mm
SKF 8016 Single Row Ball Bearings	40.000 mm	90.0000 mm	36.50 mm	1.50 mm
SKF 206MFF Single Row Ball Bearings	1 3/16 in	1.3438 in	0.5313 in	3.0000 in
SKF 206MF Single Row Ball Bearings	203FFS	17.000 mm	40.0000 mm	12.0 mm
SKF 205SZZST Single Row Ball Bearings	140.000 mm	210.0000 mm	33.00 mm	2.00 mm
SKF 205SZZG Single Row Ball Bearings	202FFS5	15.000 mm	35.0000 mm	11.0 mm
SKF 205SZZC Single Row Ball Bearings	130.000 mm	200.0000 mm	33.00 mm	2.00 mm
SKF 205SZZ29 Single Row Ball Bearings	120.000 mm	180.0000 mm	28.00 mm	2.00 mm
SKF 205SZ Single Row Ball Bearings	50.000 mm	110.0000 mm	44.40 mm	2.00 mm
SKF 205SZZ23 Single Row Ball Bearings	3/4 in	1.3750 in	3.4375 in	2.1875 in
SKF 205SFFG Single Row Ball Bearings	203FSF	17.000 mm	40.0000 mm	12.0 mm