Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
LINK BELT 28RG3210E3 Single Row Ball Bearings	190.000 mm	290.0000 mm	46.00 mm	2.00 mm
LINK BELT 31RG3210E3 Single Row Ball Bearings	201FSF	12.000 mm	32.0000 mm	9.0 mm
LINK BELT 35RBG3211E3 Single Row Ball Bearings	190.000 mm	290.0000 mm	46.00 mm	2.00 mm
LINK BELT 24R3209E3 Single Row Ball Bearings	202FFSG	15.000 mm	35.0000 mm	11.0 mm
LINK BELT 19R3208E3 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
LINK BELT 31RB3210E3 Single Row Ball Bearings	180.000 mm	280.0000 mm	46.00 mm	2.00 mm
LINK BELT 31R3210E3 Single Row Ball Bearings	170.000 mm	260.0000 mm	42.00 mm	2.00 mm
LINK BELT 24RB8208E3 Single Row Ball Bearings	208FFSG	40.000 mm	80.0000 mm	21.0 mm
LINK BELT RG3209E3 Single Row Ball Bearings	70.000 mm	125.0000 mm	39.70 mm	1.50 mm
SKF 203SZZST-W64F Single Row Ball Bearings	65.000 mm	140.0000 mm	58.70 mm	2.00 mm
SKF 305SZZST Single Row Ball Bearings	160.000 mm	220.0000 mm	56.00 mm	2.00 mm
SKF 38ZZST Single Row Ball Bearings	50.000 mm	110.0000 mm	44.40 mm	2.00 mm