Single Row Ball Bearings

Contact Now

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 1816SZZ Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm
SKF 1903SZZ Single Row Ball Bearings	200.000 mm	310.0000 mm	51.00 mm	2.00 mm
SKF 1905SFFP Single Row Ball Bearings	3/4 in	1.0156 in	0.4375 in	2.0000 in
SKF 1902SFF Single Row Ball Bearings	165-47	88.903 mm	160.3000 mm	76.20 mm
SKF 1902SZZ Single Row Ball Bearings	160.000 mm	240.0000 mm	38.00 mm	2.00 mm
SKF 1901SFF Single Row Ball Bearings	9	5 1/4 in	16 in	0.55 in
SKF 1900SFF Single Row Ball Bearings	260.000 mm	400.0000 mm	65.00 mm	3.00 mm
SKF 1900SZZ Single Row Ball Bearings	65.000 mm	140.0000 mm	61.90 mm	2.00 mm
SKF 1821S Single Row Ball Bearings	280.000 mm	420.0000 mm	65.00 mm	3.00 mm
SKF 1818SZZ Single Row Ball Bearings	75.000 mm	130.0000 mm	41.30 mm	1.50 mm
SKF 1810SZZ Single Row Ball Bearings	70.000 mm	150.0000 mm	63.50 mm	2.00 mm
SKF 1810SFFP Single Row Ball Bearings	190.000 mm	290.0000 mm	46.00 mm	2.00 mm